How TT520PW Works?

2. Setup camera before starting to use

In this section, we will show you how to setup TT520PW before watching the live feed on the internet.

  • 1 – Some tips before starting …


    The TT520PW Video Monitor connects to your network either through Wi-Fi or network cable or PoE.
    TT520PW supports both Android and iOS devices with Anyscene app.
    For better security you can change the default password for your TT520PW, and create other login account to restrict its privilege.
    The TT520PW video monitor can be used with home plugs or wi-fi range extenders should you need to cover excessive distance.
  • 2 – You will also need …


    Do not demand too much, there are something that lying around now.

    what device
    An iOS/Android device

    iPhone, iPad or iPod Touch.Must be running iOS5 or later. Android phone or Android tablet. Must be running Android 2.2.4 or later.

    what a router
    A spare ethernet port on your router

    Just for setup. Your router was most likely given to you by your internet provider.

    what a password
    Your Wi-Fi Password to your home network

    For the same router your TT520PW is plugged into. Not needed for network cable connection.

  • 3 – Plugging in the monitor…


    Power up and connect the monitor to your router

    TT520PW connects to router
    1). Plug the provided Ethernet cable into a spare ethernet port on your router.
    2). Plug the other end of Ehternet cable into the ethernet port on the back of the main unit.
    3). Plug the Power cable into the power socket on the back of the main unit.
  • 4 – Connect your smartphone to your wi-fi network


    If your smartphone has already connected to wifi network, you can be inattentive on this step.

    enable wifi
    Note: This should be the same Wi-Fi network being broadcast from the router in Step 1.
  • 5 – Download the app and install app into your smartphone.


    Search for “Anyscene” or scan the QR code to get to the download page. and then download the app and install it right now. Learn more Anyscene

    iOS Anyscene
    Android Anyscene
  • 6 – Run the Anyscene app and add your camera.


    There are two ways to add TT520PW to your Anyscene APP.

    Press “Search” to scan the camera on the same network.

    Search camera

    Press the camera you found to connecting.

    Discover camera

    Press “QRCode” to scan the QR code on the back of camera.

    Anyscene add qr code Anyscene scan qr
  • 7 – Enther the password and then press “Connect”.


    Note: Both Default username and Default password are “admin”.

    Enter camera password
  • 8 – Setup the Wi-Fi connection by pressing “Setup WIFI”.


    Press setup wifi
  • 9 – Choose your Wi-Fi SSID.


    After this, press “Save” to save your setting.

    Choose wifi ssid
    Enter wifi cryptogram
  • 10 – Press the camera and start to view the video.


    Start watching Start watching
Bring yours home now

Bring yours home now